As a piece of heavy machinery, there are 10 essential hollow molding blow molding machine precautions that customers need to keep in mind.
1. Before starting up, it’s mandatory to undergo formal training from the blow molding machine manufacturer’s trainers. Informal operators are not allowed on the job.
Yankang provides 24-hour technical support for customers and regularly holds technical training sessions; feel free to reach out with any questions.
2. Generally, it’s important to minimize the operation of the machine while it’s running without a load.
3. For optimal performance, ensure that the main power supply line connected to the equipment is appropriate for the electrical and electronic components. After installation, double-check the screws on the electrical components to ensure they’re tight and secure. Make sure the equipment is properly grounded, and continuously monitor for any overheating or looseness in the electrical parts during operation. If anything seems off, address it immediately.
4. For the safe operation of the blow molding machine and personal safety, never operate or approach the equipment after consuming alcohol or when feeling fatigued. This is to prevent any injuries or accidental misoperations.
5. When operating the machine, familiarize yourself with the function of each button and the limit positions of every action on the touchscreen. Know all the pages, buttons, and parameter definitions, and settings on the touchscreen. Always stand in a safe position while operating to avoid injury in case of unexpected machine behavior.
6. Keep a close eye on the heating current meter to prevent damage to the temperature controller, which could lead to low temperatures in the corresponding area. Always monitor the current of each motor to ensure it’s not excessive and check for any overheating in the motors, paying special attention to the maintenance of the motor bearings.
7. Regularly clean the electrical control cabinet and motors to remove dust and debris, ensuring proper ventilation for effective heat dissipation. This helps prevent overheating of electrical components and motors.
8. During normal operations, all lubrication points on the machinery should be well-lubricated, with at least one oil refill per shift. Keep the machines clean, free from oil stains, and rust.
9. If the machinery is not in use for an extended period, make sure to apply anti-rust treatment.
10. Frequently check the tension of the V-belts and make timely adjustments.
Here are the top 10 blow molding machine essential precautions.
Choose a blow molding machine, and choose Yankang.