Category: Exhibitions

As the epidemic recedes, the safety of the environment. Major companies are actively preparing for International plastics & rubber exhibitions, As the largest water tank blow molding machine manufacturer in China, Yankang Plastic Machinery Company is no exception. In 2023,we are ready to show you our latest technology, equipment, and achievements in the field of rubber plastic machinery at these International plastics & rubber exhibitions. Yankang sincerely welcomes your presence!   Why should you visit international plastics & rubber exhibitions? ★ Discover the latest…

The 2021 Shenzhen International Rubber and Plastic Exhibition( CHINAPLAS 2021) will be held at the Shenzhen International Convention and Exhibition Center on April 13-16, 2021. Qingdao Yankang Plastics Machinery exhibited YK series of new blow molding machines, of which a 20000L large multi-layer hollow blow molding machine was the first ultra-large blow molding machine exhibit in China. According to the organizer, the exhibition area with a total area of ​​350,000 square meters will bring together 50 participating countries and regions,…

From January 5th to 8th, Yankang will be invited to participate in ArabPlast 2019. As a professional manufacturer of blow molding machines, Yankang has been committed to providing better products and services for everyone. Therefore, the requirements of the exhibition are very strict. ArabPlast 2019, the largest trade expo for plastics, petrochemicals, and rubber industry in the MENA region, is set to bring together key players and experts in the sector from around the world in Dubai in early January. The…

September 24-28，Yankang attended the plastic machinery exhibition named 2018 COLOMBIAPLAST-EXPOEMPAQUE. At this exhibition, Yankang attracted many visitors. Here is the truth. As the biggest water tank blow molding machine manufacturers in China, Yankang holds a number of international leading technologies. Such as: The use of servo-hydraulic system：compared to the traditional hydraulic system, safe and efficient, saving more than 40%. And it’s less noisy. Innovative die design:using advanced electromagnetic induction heating system, safe and reliable, reduce heating time, accurate temperature control,…

September 24-27，Yankang was invited to attend the 2018 IRANPLAST Exhibition. This is the 12th exhibition of plastic machinery held in Iran since 2002. As we all know，in the fields of Raw Materials, Machinery & Moulds, Auxiliaries, and Services for Plastics & Rubber industries，IRANPLAST are one of the largest and most important exhibitions in Iran. It is also one of the most important exhibitions in the Middle East and Asia. In this exhibition ,Yankang Plastic Machinery has brought many new technologies…

The 12th International Exhibition of Iran Plast is held from September 24 to 27, 2018. Qingdao Yankang Plastic Machinery Co., Ltd was invited to attend the exhibition. Here is the truth. IRAN PLAST is one of the largest and most important exhibitions in Iran, in the fields of Raw Materials, Machinery & Moulds, Auxiliaries, and Services for Plastics & Rubber industries, as well as, one of the most magnificent ones in the Middle East region and Asia. Historically, IRANPLAST has…

Qingdao Yankang Plastic Machinery will attend the plastic blow molding machine exhibition named COLOMBIAPLAST-EXPOEMPAQUE in 2018. COLOMBIAPLAST and EXPOEMPAQUE are sponsored by the Colombian plastics association.COLOMBIAPLAST has been held at the same time as Columbia industrial exhibition since 2000. It has successfully held eight exhibitions, covering an area of 13,000 square meters in 2016. This exhibition is recognized as the best exhibition of the International Fair of Bogota and as such has brought together a large number of exhibitors and visitors…

On June 11-14, Qingdao Yankang Plastic Machinery Co., Ltd. was invited to attend the 2018 ARGENPLAS in Buenos Aires, Argentina. Yankang water tank blow molding machine has attracted a lot of attention. The ARGENPLAS has been successfully held for 15 sessions every two years. It is Argentina’s most comprehensive exhibition and trade fair for plastic machinery, equipment, and materials. In this exhibition, Yankang Plastic Machinery showed its customers the latest design technology. Including the following aspects: 1.FOAM LAYER ：Foam layer…

The 18th edition of PLAST, the triennial international exhibition for plastics and rubber industries, opened on May 29 in Milano Italy. Qingdao Yankang Plastic Machinery Co., Ltd.was invited to participate in this exhibition. The exhibition was held once in three years and was organized by Italian plastics and rubber machinery equipment and mold manufacturers. It was the second-largest exhibition of the plastics industry held in Europe. Also, it was second only to the German k show. During the exhibition, Yankang…

On April 24-27, Qingdao Yankang Plastic Machinery Co., Ltd. was invited to attend the 2018 CHINAPLAS in Shanghai. “CHINAPLAS” has been accompanied by the growth of China’s plastics and rubber industry for nearly 30 years. So far, it has developed into the largest rubber and plastic industry exhibition in Asia. It has also played a positive role in promoting the development of China’s rubber and plastics industry. At present, the ” CHINAPLAS” is not only the largest plastic and rubber…