Today I recommend everyone to watch a video of the production and operation of a hollow blow molding machine.
The video shows the entire process of Yankang’s 1000L-6 layer plastic barrel large blow molding machine in production. This blow molding machine can produce multi-layer plastic barrels of different models and specifications, ranging from 200L to 1000L, with 1-6 layers.
In addition to blowing plastic barrels, this equipment can also support other product customization, such as customized transportation facilities, roadblocks, plastic pallets, mobile toilets, solar liners, plastic table tops, medical headboards, septic tanks, and leather pad The production of boats and other plastic blow molding products.
In the process of using the blow molding machine to produce, I believe that everyone has encountered various failures. Some failures are caused by damage to some parts or other external reasons, and some are caused by the blow molding machine not running. As a result of stability, by watching this production operation video, you will find some troubles and solutions for the unstable operation of the blow molding machine.
The main points are as follows:
The first is that the control system of the blow molding machine is unstable. The control system controls the operation and production of the entire blow molding machine. Every step of the process and every action of the equipment requires a unified command by the control system. Before production, technicians will input the corresponding process parameters into the control system to ensure that the control system can accurately command and control each step of the production process during the production process. If the performance of the control system is not stable enough, or the blow molding machine is not equipped with a suitable control system equipment, the control system will not work stably, which will affect the stable operation of the blow molding machine. The blow molding machine control system is a key factor that affects the stable operation of the blow molding machine. If the blow molding machine equipment being used as an unstable operation problem, we can start with this aspect to solve the problem.
The second is the unstable production pressure of the blow molding machine. The pressure involved in the production process of the blow molding machine is defined as the clamping force and the pressure value of the air compressor. These two pressure values, no matter which aspect has a problem, the pressure value fluctuation will affect the current production process of the blow molding machine, which will involve the next step of production. The main reasons are oil cylinder leakage, hydraulic pump wear, and solenoid valve pressure relief. Paying attention to these three aspects can save a lot of time and help solve problems efficiently.
Some colleagues may think that the reason for the unstable operation of the blow molding machine is the whole equipment, but it is not. We all know that a blow molding machine is composed of multiple parts and supporting facilities with different functions. If the blow molding machine has an unstable operation failure, the problem must be in a certain process or a certain process. For each component, you need to determine the cause of the fault based on the failure, and then implement the corresponding solution.
The above content is the reasons and solutions for the unstable operation of the blow molding machine that we saw when watching the video of the production and operation of the hollow blow molding machine. These two points are the most important and most common problems. Only by knowing where the problem lies can we take different solutions according to different problems.