1000L Water Tank Blow Molding Machine

The 1000L water tank blow molding machine can be used to produce water tank from 300L to 1000L in 1-6 layers.

Water Tank Daily Output : 180-300PC

Delivery Date: 2-3 Month

Commodity

OutputUnitWeightUnit
300L Tank18-20PC/H4-5

KG

500L Tank

16-18PC/H6-10

KG

750L Tank

14-16PC/H10-15

KG

1000L Tank10~12PC/H16-20

KG

Latest Technology

1.FOAM LAYER :Foam layer as a new innovation which can increase the wall thickness.

2.INDUCTION HEATERS:Induction heaters for die head and extruder can save 40-50% energy.

3.SERVO MOTOR:Servo motor for clamping system which can save 40% energy.

4.REMOTE SERVICE:It is easier to check the machine operating conditions including cycle time and output. In addition, it is easy to check the machine fault and judge the machine problem.

More advantages about our blow molding machine:https://www.yankangmachine.com/technology-advantages/

Leading International Technology

For example:

Using a more energy-efficient IKV screw, the blow molding machine’s plasticizing ability is 1.5 times faster than similar products.

For more advanced configurations, please refer to the following figure.

yankang blow molding machine configuration

Multi-layers Die Head Technology:
First,multi-layer mold design makes the wall thickness uniform and stable. Second,it can increase production efficiency by 5 times. Finally,the utilization rate of recycled materials increased by 4 times.

yankang blow molding machine die head technology

Output For Each Capacity

1000L water tank blow molding machine can use 300L, 500L,700L and 1000L blow molds.

Can be used for production:300L tank 18-20 PC/H,500L tank 16-18 PC/H,750L tank 14-16 PC/H,1000L tank 10-12 PC/H.

For more production details:

1000l water tank blow molding machine output

Technical data for YK 2000L series

In the table below, the data of the blow molding machine of YK 1000L-2 layers,YK 1000L-3 layers,YK1000L-4 layers,YK1000L-5 layers,YK1000L-6 layers are listed.

For more models of 1000L blow molding machines, please contact us.

1000l water tank blow molding machine technical data

The 1000L water tank blow molding machine can be used to produce water tank from 300L to 1000L in 1-6 layers.

1000L water tank application

TRAINNING
The buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;

INSTALLATION & ADJUSTMENT
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week(free of charge) in the buyer’s factory. After one week,if the buyer still needs the training,$100 should be paid for the engineer.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s food & board while installation in buyer’s factory.And the buyer should also pay for the air ticket for the engineer.

GUARANTEE 
The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.