3000L Water Tank Blow Molding Machine

The 3000L water tank blow molding machine can be used to produce water tank from 500L to 3000L in 1-6 layers.

Water Tank Daily Output:100-300PC
Delivery Date:3-4 Month

500L Tank16-18PC/H6-10KG
750L Tank14-16PC/H10-15KG
1000L Tank10-12PC/H16-20KG
1500L Tank9-11PC/H20-30KG
2000L Tank8-9PC/H30-40KG
3000L Tank5-6PC/H50-60KG

Latest Technology

1.FOAM LAYER :Foam layer as a new innovation which can increase the wall thickness.

2.INDUCTION HEATERS:Induction heaters for die head and extruder can save 40-50% energy.

3.SERVO MOTOR:Servo motor for clamping system which can save 40% energy.

4.REMOTE SERVICE:Easier to check machine running conditions, cycle times, output,reminding for machine maintenance. Real-time monitoring is convenient for supplier to check the machine faulty and judge the machine problems.

More advantages about our blow molding machine:https://www.yankangmachine.com/technology-advantages/

Leading international technology

Such as:

Innovative die design, advanced electromagnetic induction heating system, safe and reliable, can reduce heating time and accurate temperature control, energy saving 30%-50%.

For more advanced configurations, please refer to the following figure.

yankang blow molding machine configuration

Multi-layers Die Head Technology

Adopt new integrated multi-layer die design, from one layer to six layers, to ensure a more uniform and stable wall thickness.The productivity of blow molding machine improve 5 times than traditional blow molding machine and the utilization rate of recycle material improve 4 times.

yankang blow molding machine die head technology

Output For Each Capacity

3000L water tank blow molding machine can use 500L,700L, 1000L,1500L,2000L and 3000L blow molds.

Can be used for production:500L tank 16-18 PC/H,750L tank 14-16 PC/H,1000L tank 10-12 PC/H,1500L tank 9-12 PC/H,2000L tank 8-9 PC/H and 3000L tank 5-6 PC/H.

For more production details:

3000l water tank blow molding machine output

Technical data for YK 3000L series

In the table below, the data of the blow molding machine of YK 3000L-2 layers,YK 3000L-3 layers and YK 3000L-4 layers are listed.

For more models of 3000L blow molding machines, please contact us.

3000l water tank blow molding machine technical data

The 3000L water tank blow molding machine can be used to produce water tank from 500L to 3000L in 1-6 layers.

3000L water tank application

The buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;

The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week(free of charge) in the buyer’s factory. After one week,if the buyer still needs the training,$100 should be paid for the engineer.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s food & board while installation in buyer’s factory.And the buyer should also pay for the air ticket for the engineer.

The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.